| MODEL | 12V 60W | 24V 60W | |
| OUTPUT | DC VOLTAGE | 12V | 24V |
| RATED CURRENT | 5A | 2.5A | |
| CURRENT RANGE | 0~5A | 0~2.5A | |
| RATED POWER | 60W | 60W | |
| RIPPLE& NOISE (MAX.) | 100mV | 150mV | |
| VOLTAGE TOLERANCE | ±1% | ±1% | |
| SETUP , RISE TIME | 500ms,30ms / 230VAC 1200ms / 115VAC at full load | ||
| HOLD UP TIME(Typ.) | 50ms / 230VAC 10ms / 115VAC at full load | ||
| INPUT | VOLTAGE RANGE | 85 ~ 264VAC | |
| FREQUENCY RANGE | 47~63Hz | ||
| POWER FACTOR(Typ.) | PF>0.6/220VAC | ||
| EFFICIENCY(Typ.) | 88% | 89% | |
| AC CURRENT(Typ.) | 1.5A/115V 0.9A/230V | ||
| INRUSH CURRENT(Typ.) | cold start 45A/230V | ||
| SHORT CIRCUIT | protection type: recovers automatically after fault condition is removed | ||
| PROTECTION | OVER LOAD | 105~135% hiccup mode, auto-recovery | |
| DC ADJ. RANGE | ±10% rated output voltage | ||
| ENVIRONMENT | WORKING TEMP | –40°C~+60°C (no frost) | |
| WORKING HUMIDITY | 20%~90%RH | ||
| STORAGE TEMP , HUMIDITY | –40°C~85°C/10%~95%RH | ||
| SAFETY&EMC | SAFETY STANDARDS | CE ROHS | |
| WITHSTAND VOLTAGE | I/P-O/P: 1.5KVAC/1min, I/P-F/G: 1.5KVAC/1min, O/P-F/G: 0.5KVAC/1min | ||
| EMC TESTING STANDARD | EN55015:2006; EN61547:1995+A1:2000;EN61000-3-2:2006 | ||
| EN61000-3-3:1995+A2:2005;EN61347-3-13:2006 | |||
