24v 120w Waterproof LED Power Supply IP67 5a Constant Voltage Switch Driver 220v 230v ac dc Aluminum Outdoor SMPS

MODEL				CLPS120-W1V12		CLPS120-W1V24
OUTPUT		RATED VOLTAGE		12V		24V
		NO-LOAD VOLTAGE(MAX.)		12.6V		25.2V
		VOLTAGE TOLERANCE		±5%		±5%
		RATED CURRENT		10A		5A
		CURRENT RANGE		0-10A		0-5A
		RATED POWER		120W		120W
		RIPPLE& NOISE (MAX.)		120mVp-p		150mVp-p
		POWER FACTOR(Typ.)		0.6		0.6
INPUT		VOLTAGE RANGE		100-240VAC
		FREQUENCY RANGE		50-60 Hz
		AC CURRENT(Typ.)		2.05A/115V, 1.02A/230V
		EFFICIENCY(Typ.)		90%		90%
		COLD START CURRENT		30A/AC220V
		SETUP, RISE, HOLD UP TIME		200ms, 100ms, 30ms
		NO-LOAD CURRENT		<50mA/240VAC
PROTECTION		OVER LOAD		hiccup 115%~135% of the rated power 120W,
				recovers automatically after fault condition is removed
		OVER CURRENT		protected over the maximum rated current,
				recovers automatically after fault condition is removed
		SHORT CIRCUIT		hiccup short circuit,
				recovers automatically after fault condition is removed
		OVER TEMP		protected when the Rectifier ≥105°C,
				recovers automatically after temperature fall to environment temp
ENVIRONMENT		WORKING TEMP&HUMIDITY		–20°C~+60°C (no frost), 20%~90%RH
		STORAGE TEMP&HUMIDITY		–40°C~85°C, 10%~95%RH
		SEISMIC CAPACITY		10-500Hz 2G 10.min/1 60min
		WITHSTAND VOLTAGE		I/P-O/P: 1.5KVAC/1min, I/P-F/G: 1.5KVAC/1min, O/P-F/G: 0.5KVAC/1min,
		INSULATION RESISTANCE		100M ohm s/DC500V
SAFETY&EMC		SAFETY STANDARDS		GB4943 ;IEC60950-1; EN60950-1
		EMC STANDARDS		EN55022 CLASS A;GB9254
REMARK		1. The above mentioned data were measured at 220VAC input and 25°C.
		2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated
		with a 0.1uf & 47uf parallel capacitor.

Share:

Ena Leung

Leave a Reply Cancel reply

Related Posts

smart home power supplies

Using LED Power Supplies to Elevate Your Space

Introduction The LED power supply plays a crucial role in maintaining the performance and reliability of LED lights, serving as the central control unit

Differences between LED Grow Lights and General LED Lights

Differences between LED Grow Lights and LEDs for lighting Differences between LEDs for plants and LEDs for lighting: LED lights for plants are designed for plant

lighting fair

2024 Guangzhou International Lighting Exhibition

Join us at the 2024 Guangzhou International Lighting Exhibition (GILE) from June 9th to June 12th at the Pazhou Complex of China Guangzhou Import and

Understanding the Definitions and Distinctions of Class I, Class II, Class III, and Class 2 Devices

In the realm of electrical safety standards, Class I, Class II, Class III, and Class 2 devices primarily revolve around considerations for the insulation systems.